“We have your application covered”
Thermoguard Fire Varnish Basecoat is a clear intumescent varnish that is the first coat of a 2 coat system (3 coat externally) for the decorative Fire Protection of timber and timber derived substrates to Class 1, Class 0, EN Class B s2 d0. For 30 & 60 minutes Fire Resistance.
Thermoguard Fire Varnish Overcoat (Exterior) is a solvent based, clear UV and wear resistant varnish that is the final coat of a 2 coat system for the decorative Fire Protection of timber and timber derived substances to Class 1, Class 0, EN Class B s2 d0.
Thermoguard Fire Varnish Overcoat (Interior) is a water based, clear UV and wear resistant varnish that is the final coat of a 2 coat system for the decorative Fire Protection of timber and timber derived substrates to Class 1, Class 0, EN Class B s2 d0. For 30 or 60 minutes Fire Resistance.
Thermoguard Flame Retardant Anti-Graffiti Bond & Colour Coat is an anti-graffiti, decorative, flame retardant coating for walls. It is a water-based, high durability two-pack coating system, designed to enable removal of graffiti through use of graffiti removers. The chemically cured coatings provide excellent resistance to oils, inks and spray paints.
Thermoguard Flame Retardant Floor Paint is a heavy-duty decorative flame retardant coating for floors to showrooms, factories, warehouses, workshops, garages, etc. It is a water-based, high durability two-pack epoxy resin coating, designed to withstand vehicular and fork lift truck traffic. The chemically cured coating provides excellent resistance to oils, inks and other chemicals.
Thermoguard Flame Retardant Topcoat is an oil based, decorative flame retardant paint finish for use over Thermoguard Wallcoat, Timbercoat and Thermocoat W to protect, decorate and complete these fire protection upgrading systems. Can also be used direct to bare or sound previously painted non-combustible substrates where the upgrading properties of a Thermoguard basecoats are not required.
Thermoguard High Build Metal Primer is a compatible and recommended corrosion resistant primer for use on suitably prepared steel prior to the appllicaton of Thermoguard Thermocoat W.
Thermoguard Smoke & Flame Retardant Dualcoat is a new generation of fire retardant topcoat and maintenance paint for timber surfaces protected with Thermoguard Timbercoat internally and externally. As part of a complete system it controls surface spread of flame and fire propagation, total smoke control, flaming droplets and particulates to BS EN Class B s1 d0.
Thermocoat W is an economical, water based intumescent paint system providing fire resistance to structural steel and cast iron for up to 90mins with a minimum number of coats.
Thermoguard Thermoproof Clear Sealer is available in a matt or satin finish and is used as a protective coat to be applied over Thermoguard Thermoproof Fluid where protection from weather, washing, dirt, damp & UV damage is required. Internal projects require 1 coat of Thermoguard Thermoproof Clear Sealer to be applied and exterior projects require 2 coats to be applied.
Thermoguard Thermoproof Fluid is a clear, one coat, colourless, penetrating Fire Protection liquid for porous internal and external timber. Thermoguard Thermoproof Clear Sealer helps protect external & internal wood from weather, washing, dirt, damp & UV damage.
Thermoguard Timbercoat is a durable fire protection paint for interior and exterior timber surfaces which meets new Fire Regulations standard BS EN Class B s1 d0, BS Class 1 and Class O Surface Spread of Flame, and can also achieve 30 & 60 minutes Fire Resistance in certain instances. Thermoguard Timbercoat expands to create a barrier, insulating wood from heat and oxygen.
A clear, single pack, permanent external weather-resistant coating which stops the adhesion of fly posters and all types opf graffiti to bare or painted brick, stone, concrete, render, timber and metal, yet allows moisture to escape.
A clear water based primer for use on porous substrates that may be prone to ‘wetting out’ or darkening, prior to application of Thermoguard Vandalguard.
Thermoguard Wallcoat is an intumescent basecoat used as part of a complete system to upgrade potentially dangerous ‘multi-layer’ previously painted walls & ceilings in communal areas. It controls surface spread of flame and fire propagation to Class 0 & EN Class B and can be applied to painted plaster, Artex, plasterboard, brick, concrete and lathe & plaster.